Search Results for: 379

18gg cut resistant HPPE/ glass/ polyester shell
The knitted liner is comprised of 15.8% (+/- 2%) WasteNot™  polyester (rPET 9.6% by total glove weight) which is made from recycled post consumer PET bottles
Sandy nitrile palm
Reinforced thumb saddle for additional protection
Touchscreen compatible fingertips
Water resistant treatment lasts up to 5 washes
Snug-fitting knit wrist
OEKO-TEX STANDARD® 100 certified
Reduces 8.04g CO2 emissions per pair vs. using virgin polyester

NSC Best in Show Winner 2022


Cotton fleece lining
Full-grain cowhide leather
Canadian roper style with snap back closure

Cotton fleece lining
Full-grain deerskin leather
Canadian roper style with inset thumb
Slip-on style cuff with snap back closure

3M Recycled Thinsulate™ EC100 lining is made with 78% post consumer recycled materials
Full-grain goatskin leather
Heavy duty rubber on back of hand, fingers and wrist
Classic gunn cut with inset thumb
Gauntlet style cuff with leather gore
Shirred elastic wrist

Full-grain goatskin leather
Heavy duty rubber on back of hand, fingers and wrist
Classic gunn cut with inset thumb
Shirred elastic wrist
Gauntlet style cuff

Dryhide™ water-resistant cowhide leather palm and back
Cutshield™ P-aramid/steel/polyester liner
Stitched with Kevlar®
Reinforced index finger and palm patches
Hooded fingertips and inset thumb
Snug-fitting shirred elastic wrist
6″ Gauntlet style cuff with leather gore
2 Flame resistant reflective strips

Dryhide™ water-resistant cowhide leather palm and back
Cutshield™ P-aramid/steel/polyester liner
Stitched with Kevlar®
Reinforced index finger and palm patches
Pulse Protector
Hooded fingertips and inset thumb
Snug-fitting shirred elastic wrist
3″ Gauntlet style cuff with leather gore
Flame resistant reflective strip

Dryhide™ water resistant cowhide leather palm and back
Stitched with Kevlar®
Reinforced index finger and palm patches
Hooded fingertips and inset thumb
Snug-fitting shirred elastic wrist
4″ band cuff
Flame resistant reflective strip

18gg cut resistant HPPE/glass/polyester shell
The knitted liner is comprised of 21% (+/- 2%) WasteNot™  polyester (rPET 12% by total glove weight) which is made from recycled post consumer PET bottles
Sandy nitrile palm
Reinforced thumb saddle for additional protection
Touchscreen compatible fingertips
Water resistant treatment lasts up to 5 washes
Snug-fitting knit wrist
OEKO-TEX STANDARD® 100 certified
Reduces 9.32g CO2 emissions per pair vs. using virgin polyester

Cotton fleece lining
Full-grain deerskin leather
Canadian roper style with inset thumb
Cuff with snap back closure

15gg landfill biodegradable ZeroWaste™ nylon seamless knit degrades in 5 years in anaerobic landfill conditions (ASTM D5511)
Biodegradable nitrile coating engineered with Reclaim™ technology
Conductive coating on palm and fingers can be used on all touchscreen devices
Ergonomically formed to help reduce hand fatigue
Snug-fitting seamless knit wrist keeps out dirt and debris

Will show up to 48% biodegradation in 609 days (ASTM D5511). Once biodegradation begins, the gloves are converted into biogas and create energy to fuel our homes, businesses, and communities.

Learn how our biodegradable gloves can convert into energy here

18gg cut resistant HPPE/glass/steel/ seamless knit shell
WasteNot™ polyester seamless knit made from 5% recycled post consumer PET bottles
First layer water resistant full dip flat nitrile
Second layer sandy nitrile palm
Water resistant treatment lasts up to 5 washes
Snug-fitting knit wrist
OEKO-TEX STANDARD® 100 certified
Reduces 5.6g CO2 emissions per pair vs. using virgin polyester

**Note – we are doing a rolling change; Therefore you may get mixed sizes that are older inventory as we work through remaining inventory.

18gg cut resistant HPPE/glass/steel/ seamless knit shell
WasteNot™ made from 5% (+/-2%) recycled post consumer PET bottles
Heavy duty TPR on fingers, thumb, knuckles, and back of hand
First layer water resistant full dip flat nitrile
Second layer sandy nitrile palm
Water resistant treatment lasts up to 5 washes
Snug-fitting knit wrist
OEKO-TEX STANDARD® 100 certified
Reduces 5.6g CO2 emissions per pair vs. using virgin polyester

**Note – we are doing a rolling change; Therefore you may get mixed sizes that are older inventory as we work through remaining inventory.

13gg cut resistant HPPE/ glass/polyester shell
The knitted shell is comprised of 15.5% (+/- 2%) WasteNot™  polyester (rPET 10.8% by total glove weight) which is made from recycled post consumer PET bottles
Sandy latex palm
PVC Reinforced thumb saddle for additional protection
Water resistant treatment lasts up to 5 washes
Snug-fitting knit wrist
OEKO-TEX STANDARD® 100 certified
Reduces 13.96g CO2 emissions per pair vs. using virgin polyester

Slim fit
Classic Heritage Logo
Made from 6.25% recycled materials and contains organic material
Fabric: 6.5 oz., 30 singles 50% polyester (6.25% recycled), 46% cotton (6.25% organic), 4% rayon Contains organic & recycled materials

Size 6: Small, Size 8: Medium, Size 12: Large, Size 16: XL

**Slim fit, best to size up

Premium full-grain deerskin leather
Drivers style with inset thumb
Snug-fitting shirred elastic wrist and shortie slip-on style cuff
Proudly made in our local Burnaby, BC factory
See more products in our Heritage Collection

Solid black short sleeve crew neck t-shirt
100% soft premium cotton
Double needle stitching in sleeves and bottom hem
Taped shoulder-to-shoulder with sewn seamed collar
Tubular knit construction
Semi-fitted fashion cut, men’s fitting
Classic Watson Heritage logo print on front and back
Machine wash
See more products in our Heritage Collection

Watson Gloves Heritage T-Shirt Size Chart


Made for Mig/Stick Welding

Durable elksplit leather back with full-grain reverse palm offers heat protection
Stitched with Kevlar® thread for strength and durability
Cotton fleece lined back of hand for additional heat protection
Left hand leather cowhide back patch and pulse protector
Gauntlet style cuff with leather gore
Snug-fitting shirred elastic wrist
Proudly made in our local Burnaby, BC factory

ANSI Level 1 rating can withstand up to 80°C /176°F for at least 15 seconds. Read More

Made for Mig/Stick Welding
Cutshield™ P-aramid/steel/polyester liner for superior protection
Durable elksplit leather back with full-grain reverse palm offers heat protection
Stitched with Kevlar® thread for strength and durability
Cotton fleece lined back of hand for additional heat protection
Left hand leather cowhide back patch and pulse protector
Gauntlet style cuff with leather gore
Snug-fitting shirred elastic wrist
Proudly made in our local Burnaby, BC factory


Made for Mig/Tig Welding

Elk split leather palm and back
Stitched with Kevlar® thread for strength and durability
Fully wrapped leather index finger
Vibration dampening gel padded palm
Snug-fitting shirred elastic wrist
4.5″ stiff split cuff for easy on/off
Proudly made in our local Burnaby, BC factory

Made for Mig/Stick Welding
Cutshield™ P-aramid/steel/polyester liner
Elk split leather palm and back
Stitched with Kevlar® thread for strength and durability
Fully wrapped leather index finger
Vibration dampening gel padded palm
Snug-fitting shirred elastic wrist
4.5″ stiff split cuff for easy on/off
Proudly made in our local Burnaby, BC factory


Made for Mig/Stick Welding

Elksplit leather back and palm
Stitched with Kevlar® thread for strength and durability
Cotton fleece lined back of hand for heat protection
Green heat treated cow split leather palm patches and pulse protector
Wing thumb
6″ extended gauntlet style cuff with wool lining
Proudly made in our local Burnaby, BC factory

ANSI Level 4 rating can withstand up to 260°C/500°F for at least 15 seconds. Read More

Made for Stick Welding
Cutshield™ P-aramid/steel/polyester liner
Elksplit leather back and palm
Stitched with Kevlar® thread for strength and durability
Cotton fleece lined back of hand for heat protection
Green heat treated cow split leather palm patches and pulse protector
Wing thumb
6″ extended gauntlet style cuff
Proudly made in our local Burnaby, BC factory

Made for Mig/Stick Welding
Split cowhide leather
Stitched with Kevlar® thread for strength and durability
Cutshield™ P-aramid/steel/polyester liner
Full leather index finger and inset thumb
Gauntlet style cuff
Snug-fitting shirred elastic wrist

Meets ANSI/ISEA 105-2016 Heat level 2 and can withstand up to 140°C/284°F for at least 15 seconds. Read More

Made for Tig Welding
3M Recycled Thinsulate™ EC100 lining is made with 78% post consumer recycled materials
Full-grain goatskin leather
Gauntlet style cuff with leather gore
Snug-fitting shirred elastic wrist
Slip-on style cuff

Made for Mig Welding

Winter Heavy Metal

3M Thinsulate™ C100 lining
Elk split leather palm and back
Stitched with Kevlar® thread for strength and durability
Fully wrapped leather index finger
Vibration dampening gel padded palm
Snug-fitting shirred elastic wrist
4.5″ stiff split cuff for easy on/off
Proudly made in our local Burnaby, BC factory

Made for Mig/Stick Welding

Winter Heavy Metal

3M Thinsulate™ C100 lining
Cutshield™ P-aramid/steel/polyester liner

Elk split leather palm and back
Stitched with Kevlar® thread for strength and durability
Fully wrapped leather index finger
Vibration dampening gel padded palm
Snug-fitting shirred elastic wrist
4.5″ stiff split cuff for easy on/off
Proudly made in our local Burnaby, BC factory

Made for Mig/Stick Welding

Winter Heavy Metal

3M Thinsulate™ C100 lining
Durable elksplit leather back with full-grain reverse palm
Stitched with Kevlar® thread for strength and durability
Cotton fleece lined back of hand for additional heat protection
Left hand leather back patch and pulse protector
Gauntlet style cuff with leather gore
Snug-fitting shirred elastic wrist
Proudly made in our local Burnaby, BC factory
Also available with cut resistant liner (ANSI A5) (9533TCR)

Made for Mig/Stick Welding

Winter Heavy Metal

3M Thinsulate™ C100 lining
Cutshield™ P-aramid/steel/polyester liner

Durable elksplit leather back with full-grain reverse palm
Stitched with Kevlar® thread for strength and durability
Cotton fleece lined back of hand for additional heat protection
Left hand leather back patch and pulse protector
Gauntlet style cuff with leather gore
Snug-fitting shirred elastic wrist
Proudly made in our local Burnaby, BC factory

Made for Mig/Stick Welding

Winter Heavy Metal

Wool lining
Durable elksplit leather back with full-grain reverse palm
Stitched with Kevlar® thread for strength and durability
Cotton fleece lined back of hand for additional heat protection
Left hand leather back patch and pulse protector
Gauntlet style cuff with leather gore
Snug-fitting shirred elastic wrist
Proudly made in our local Burnaby, BC factory

3M Thinsulate™ C200 palm / C300 back lining
Dryhide™ water and oil resistant cowhide palm and back
Stitched with Kevlar®
Cutshield™ liner made from P-aramid, steel and polyester fibres
Snug-fitting shirred elastic wrist
Gauntlet style cuff
Proudly Canadian made

3M Thinsulate™ C200 lining
Dryhide™ water and oil resistant cowhide palm and back
One finger mitt design stitched with Kevlar®
Cutshield™ liner made from P-aramid, steel and polyester fibres
Snug-fitting shirred elastic wrist
Gauntlet style cuff
Proudly Canadian made

10gg seamless knit liner is comprised of 44% (+/- 2%) WasteNot™ polyester (rPET 22% by total glove weight) which is made from recycled post consumer PET bottles
Biodegradable crinkle latex coating engineered with Reclaim™ technology accelerates biodegradation in landfill conditions
Treated to bead water off which lasts up to 5 washes
Extended snug-fitting seamless knit wrist
OEKO-TEX STANDARD® 100 certified
Reduces 30.8g CO2 emissions per pair vs. using virgin polyester

ASTM D5511 shows up to 16.8% biodegradation in 274 days

Made for Tig Welding
Full-grain goatskin leather
Classic gunn cut with inset thumb
Shirred elastic wrist
Stitched with Kevlar® thread
Gauntlet style cuff with leather gore

3M Recycled Thinsulate™ EC60 palm/ EC100 back is made with 78% post consumer recycled materials
Spandex back is made with WasteNot™  polyester which is comprised of 96% recycled PET bottles!
Cutshield™ Para-aramid/steel/polyester liner
Dryhide™ water-resistant full-grain goatskin leather palm
Conductive thumb and fingertips can be used on all touchscreen devices
Snug-fitting elastic wrist with secure Velcro® closure

3M Recycled Thinsulate™ EC100 5-finger lining is made with 78% post consumer recycled materials
Full-grain goatskin leather
Leather reinforced thumb saddle
Snug-fitting shirred elastic wrist

Made for Mig/Stick Welding
Cutshield™ P-aramid/steel/polyester liner for superior protection
Split elk hide
Clute cut design with straight thumb
Leather reinforced thumb saddle and left hand back patch
Stitched with Kevlar® thread
Gauntlet style cuff with leather gore
Proudly made in our local Burnaby, BC factory

Microfibre palm and hooded fingertips are made from 45% recycled post consumer PET bottles
Comfortable Microfibre designed for enhanced fingertip sensitivity
Spandex back is made with WasteNot™  polyester which is comprised of 96% recycled PET bottles!
Touchscreen compatible fingertips can be used on all touchscreen devices
Snug-fitting shirred elastic wrist with slip-on style cuff for extra quick easy on/off

Environmental Protection Porduct of the Year Winner 2024


Polyurethane water resistant coating retains remarkable flexibility in cold and wet conditions
Acrylic lining for thermal retention, providing hand warmth in cold environments
Textured finish for superior sure-grip in cold, wet industrial environments
30cm gauntlet style cuff provides protection for wrists and forearms

Dryhide™ water-resistant full-grain goatskin leather palm
Spandex back made with WasteNot™  polyester yarn which is comprised of 96% recycled PET bottles
Cutshield™ Para-aramid/steel/polyester liner
Hooded fingertips and reinforced thumb
Touchscreen compatible fingertips
Snug-fitting elastic wrist with secure Velcro® closure

Heavy Sherpa lining keeps hands warm in cold conditions
Hard wearing full-grain cowhide leather palm and unique 3/4 leather back
Stitched with Kevlar® thread
Heavy duty rubber on back of hand and fingers with pulse protector on wrist
Snug-fitting shirred elastic wrist
Slip-on style safety cuff for easy on/off

Warm 350g polyester velvet lining
Full-grain goatskin leather
Heavy duty rubber on back of hand, fingers and wrist
Drivers style with inset thumb
Snug-fitting shirred elastic wrist
Slip-on style cuff

3M Thinsulate™ C200 5-finger lining
Heavyweight full-grain cowhide leather
Cutshield™ P-aramid/steel/polyester liner
Straight thumb and thumb saddle
Gauntlet style cuff with leather gore
Proudly made in our Burnaby, BC factory

Bio-based nylon made from corn husks
15gg seamless knit liner made from 17% ReStalk™ bio-based nylon, that is derived from corn husks and stalk waste
4-way stretch for maximum comfort
Molecule foam nitrile palm coating
Touchscreen conductive coating on palm and fingers
Ergonomically formed
Snug-fitting knit wrist
OEKO-TEX STANDARD® 100 certified
Reduces 74.66g CO2 emissions per pair

Molecule foam nitrile coating reduces water consumption by 80% during the manufacturing process versus regular nitrile.

***A bio-based product is comprised partly of either biological materials, including renewable domestic agricultural materials such as corn or sugar cane, forestry, or marine materials such as plants. Bio-based fibres provide an alternative to petroleum derived products such as virgin nylon. Using bio-based fibres reduces C02 emissions during production versus virgin nylon. ASTM D6866-18 shows 17% biobased carbon content.

15gg landfill biodegradable ZeroWaste™ nylon seamless knit degrades in 5 years in anaerobic landfill conditions (ASTM D5511)
Biodegradable nitrile coating engineered with Reclaim™ technology
Conductive coating on palm and fingers can be used on all touchscreen devices
Ergonomically formed to help reduce hand fatigue
Snug-fitting seamless knit wrist keeps out dirt and debris
Made for a woman’s hand

Will show up to 36.8% biodegradation in 392 days (ASTM D5511). Once biodegradation begins, the gloves are converted into biogas and create energy to fuel our homes, businesses, and communities.

Learn how our biodegradable gloves can convert into energy here

Goatskin digital camo leather
Drivers style with inset thumb
Snug-fitting shirred elastic wrist and slip-on style cuff
Heritage pull tab on cuff great for hanging gloves from a carabiner or hook
Proudly made in our Burnaby, BC factory
See more products in our Heritage Collection

3M Thinsulate™ C100 lining
Goatskin digital camo leather
Drivers style with inset thumb
Snug-fitting shirred elastic wrist and slip-on style cuff
Heritage pull tab on cuff great for hanging gloves from a carabiner or hook
Proudly made in our Burnaby, BC factory
See more products in our Heritage Collection

3M Thinsulate™ C100 5-finger lining with an additional layer of microfleece
Full sock Cutshield™ Para-aramid/steel/polyester liner
Dryhide™ oil and Water Resistant full-grain goatskin leather
Impact protection heavy duty flame resistant rubber on back of hand, fingers and wrist
One finger mitt design
Wing thumb
Stitched with Kevlar® thread
Pulse protector
Gauntlet style cuff

Watson Gloves X Barstool Sports Pink Whitney Winter Mitts. Featuring 3M Thinsulate keeps your hands warm while on the ice or up the mountain. Stand out for all the right reasons with the all over Pink Whitney pattern Taslon back. These gloves feature Hy+Dry Barrier that keeps water out keeping your hands dry all day long. Anti slip PVC palm patch with Hockey Stick stitching. Gauntlet style with storm cuff keeps elements out and warmth in. Classic Watson Gloves Heritage patch on cuff.  As Biz would say ‘With these bad boys you’ll be locked and loaded’

 

View size chart

Watson Gloves X Barstool Sports Spittin’ Chiclets Winter Mitts. Featuring 3M Thinsulate keeps your hands warm while on the ice or up the mountain. These gloves feature Hy+Dry Barrier that keeps water out keeping your hands dry all day long. Anti slip PVC palm patch with Hockey Stick stitching. Gauntlet style with storm cuff keeps elements out and warmth in. Classic Watson Gloves Heritage patch on cuff. As Biz would say ‘With these bad boys you’ll be locked and loaded’.

 

View size chart